SRP-330II/332II
Ver. 2.00
Printer Introduction
Budget doesn’t mean a reduction in quality, the SRP-330II is a cost-effective thermal
POS printing solution which pairs value with reliability with a 150km TPH and 1.5 million
cuts Auto Cutter. This high quality printing solution prints high quality graphics at 180 or
203 dpi at 220 mm/second and an optional paper guide to auto-switch between 2-inch
and 3-inch width media. Paired with paper saving options, the SRP-330II can reduce the
length of a receipt up to 25%. Supplied with BIXOLON’s All All-In-One Plus™ Interface,
either a Triple Interface (USB + Ethernet + Serial) or Dual Interface (USB + Ethernet)
connectivity. Its compatible with marketing leading programming languages.
The main features of the printer are as follows
1. Print at a max. speed of 220mm/s.
2. Low noise thermal printing.
3. Support of USB & Serial (SRP-33xIICOS), USB & Parallel (SRP-33xIICOP),
USB & Ethernet & Serial (SRP-33xIICOES)
4. Internal data buffer (data can be received and buffered while printing).
5. Control of external devices like cash registers through peripheral device drive
circuit.
6. Barcode Printing.
7. Support of various print density settings (by changing memory switch settings).
To Next Page
Loading...
Need help?
General