BIXOLON SRP-350plusV Bluetooth Connection Manual

Bluetooth Connection Manual
Ver.1.00
- 4 -
1. Introduction
This Bluetooth Connection Manual provides information on the connection of
Bluetooth-enabled iOS or Android Host devices with the printer.
2. Precaution
1) To connect the printer with another device via Bluetooth, the devices must be
within 80m of one another. The connection is broken if the distance between devices
exceeds 80m.
2) The maximum separating distance may be shortened if transmission obstacles,
such as cement walls, are present.
3) If a device (such as a microwave oven, wireless LAN, etc.) that uses the same
frequency is present, transmission may be interrupted. Separate the printer and
Bluetooth-enabled device from such interrupting devices by a distance of at least 5m.

BIXOLON SRP-350plusV Specifications

General

Type	POS printer
Color	No
Print technology	Direct thermal
Maximum resolution	180 x 180 DPI
Product color	Black
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 / 60 Hz
Maximum roll diameter	79.5 mm
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	10 - 80 %
Mobile operating systems supported	Android, iOS
Windows operating systems supported	Yes
Serial interface	-
Optional connectivity	Bluetooth, Ethernet, USB 2.0, Wireless LAN
USB 2.0 ports quantity	1
Connectivity technology	Wired
Internal memory	- MB
Autocutter durability	2 million cuts

Weight and Dimensions

Depth	200 mm
Width	145 mm
Height	146 mm