BK Precision 8600 Series User Manual

40
This command sets or reads the value of the Questionable Enable register. This register is a mask for
enabling specific bits from the Questionable Event register to set the questionable summary (QUES) bit
of the Status Byte register. This bit (bit 3) is the logical OR of all the Questionable Event register bits
that are enabled by the Questionable Status Enable register.
Command Syntax
STATus:QUEStionable:ENABle <NR1>
Parameters
0 to 65535
Default Value
0
Examples
STAT:QUES:ENAB 32 STAT:QUES:ENAB 1
Query Syntax
STATus:QUEStionable:ENABle?
Returned Parameters
<NR1> (register value)
Related Commands
STAT:QUES?
STATus:PRESet
When this command is sent, the SCPI event registers are affected as follows: All bits of the following
registers are cleared to zero (0):
• Questionable Event Enable Register
• Operation Event Enable Register
NOTE: Registers not included in the list above are not affected by this command.
Command Syntax
STATus:PRESet
Parameters
None
Examples
STAT:PRES
Trace Commands
The commands in this subsystem are used to configure and control data storage into the buffer.
TRACe:CLEar

BK Precision 8600 Series Specifications

General

Brand	BK Precision
Model	8600 Series
Category	Laboratory Equipment
Language	English