BK Precision 8600 Series User Manual

43
Examples
TRAC:FILT 1
Query Syntax
TRACe:FILTer[:STATe]?
Returned Parameters
<NR1>
TRACe:DELay
This command is used to select the delay time for trigger in buffer.
Command Syntax
TRACe:DELay <NRf>
Parameters
0 to 3600s | MINimum | MAXimum | DEFault
Unit
S (second)
*RST Value
0
Examples
TRAC:DEL 1
Query Syntax
TRACe:DELay? [MINimum | MAXimum | DEFault]
Returned Parameters
<NR3>
TRACe:TIMer
This command is used to select the interval for timer.
Command Syntax
TRACe:TIMer <NRf>
Parameters
0.0002 to 3600s | MINimum | MAXimum | DEFault
Unit
S (second)
*RST Value
1
Examples
TRAC:TIM 0.1
Query Syntax
TRACe:TIMer? [MINimum | MAXimum | DEFault]
Returned Parameters
<NR3>
Source Commands
These commands control the input of the electronic load. The INPut and OUTput commands are
equivalent. The CURRent, RESistance, and VOLTage commands program the actual input current,
resistance, and voltage.
[SOURce:]INPut

BK Precision 8600 Series Specifications

General

Brand	BK Precision
Model	8600 Series
Category	Laboratory Equipment
Language	English