BK Technologies
- 50 -
Send Signal [SEND]
Conventional Analog Channels
Activated by a long-press and is the 5-tone equivalent to emergency
alarm. ANI Mode needs to be set to ve-tone. Holding this button will
send the ve-tone signal.
Squelch Adjust [SQL]
Conventional Channels
Squelch Adjust is used to change the signal strength required for the
radio’s speaker to unmute.
Squelch can be assigned as a button or menu list item.
To adjust the squelch setting, open the squelch menu. Select the
desired threshold using the -/+ buttons.
Press “ENTER” to set the level.
Site Display [STDS]
Trunking Channels
When selected, the Site Display functions shows information for the
currently operating site.
Displayed information includes: Site ID, Site Alias and RSSI.
Site Display can be assigned as a button or menu list item.
Site Lock [STLK]
Trunking Channels
Site lock prevents the radio from searching for other sites by locking it
to the currently selected site.
Site Lock can be assigned as a button or menu list item.
Site Search [STSR]
Trunking Channels
Site Search automatically searches and selects the best available
trunking site.
Site Lock can be assigned as a button or menu list item.
To Next Page
Loading...
