BK TECHNOLOGIES BKR5000 - User Selectable Code Guards

BK Technologies
- 56 -
User Password
Select “User Password” from the “Global” menu to edit the keypad
programming password. Enter a six-digit numeric.
NOTE: Changing the user password does not a󰀨ect the power-up or
administrator password.
System Settings
To edit the programmable System settings, select “Keypad” from the
programing menu then select “System” from the sub-menu.
Select the item you wish to edit from the System menu.
System Priority 1 or 2 Channel
Priority channels can be assigned on a system wide basis. If
assigned, a system priority channel will be monitored during priority
scan regardless of the current operation zone priority channel.
When set to “O󰀨”, the Priority 1 or Priority 2 Channel is designated by
the selected zone setting.
When set to “Use Main” the channel selected by the channel knob
operates as the priority channel.
To designate a specic priority channel choose “Select” from the
priority channel menu.
Select the Zone and Channel.
Tx on Priority 1 Channel
If on, the radio will transmit on the System Priority 1 channel
whenever Priority Scan is on.
Zone Settings
To edit the programmable Zone settings, select “Keypad” from the
programing menu then select “Zone” from the sub-menu.
Select Add, Delete or Edit Zone from the Zone menu.
Add Zone
When selected, a new zone is added in the next available slot.
Example: If there are seven zones in the radio, the added zone will be
zone eight.