BK Technologies
- 62 -
User Selectable Network Access Codes
The BKR5000 can be pre-programmed with up to 32, user selectable
NACs. NACS are selected via a programmed button or menu item (see
TX/RX Network Access Code Picklist). If enabled, the tones can be
programmed via the radio’s keypad.
Select “User NACs” from the programing menu.
Select the NAC to edit.
Enter the desired value in hexadecimal (000 - FFF).
NOTE: $F7E and $F7F are invalid as user selectable NAC values.
User Selectable Talkgroup IDs
The BKR5000 can be pre-programmed with up to 32, user selectable
TGIDs. TGIDs are selected via a programmed button or menu item (see
Talk Group ID Picklist). If enabled, the TGIDs can be programmed via
the radio’s keypad.
Select “User TGIDs” from the programing menu.
Select the Talk Group ID to edit.
Enter the desired value (1 - 65535).
NOTE: A Talk Group ID value of 0 is not allowed.
To Next Page
Loading...
