Mobile Hot Bar Installation
7
Installation
Serious injury, equipment damage or death could result if attempting to install
this unit yourself. Ensure that an authorized BKI service agent installs the unit.
Unpacking and Handling
The company taking delivery of this equipment is responsible for filing all freight claims with the delivering
truck line. Inspect all cartons and crates for damage as soon as they arrive. If damage to cartons or crates is
found, or if a shortage is found, note this on the bill of lading (all copies) prior to signing.
If damage is found when the equipment is opened, immediately call the delivering truck line and follow up the
call with a written report indicating concealed damage to your shipment. Ask for an immediate inspection of
your concealed damage item. Packaging material MUST be retained to show the inspector from the truck
line.
Do not walk on top of the equipment or damage to the equipment and serious
personal injury could occur. The equipment is not structurally designed to support
excessive external loading such as the weight of a person. Do not place heavy
objects on the equipment.
Move the unit as close as possible to its permanent location before moving the unit off of the shipping pallet.
Make certain there are no separately packed accessories before discarding packaging.
Location
The unit must be located on a level surface. After moving the unit, be sure to lock all 4 casters on the unit.
Wiring Connection and Grounding
Electrocution, equipment failure or property damage could result if an unlicensed
electrician performs the electrical installation. Ensure that a licensed electrician
performs the electrical installation in accordance with local codes, or in the absence of
local codes, with the National Electrical Code, ANSI NFPA 70-20XX.
Cord entry knockouts are provided on the top and bottom of the unit. Refer to the Mechanical Specifications
section of this manual for the location of these knockouts.
Refer to the Wiring Diagrams in this manual for the proper 1 or 3 phase connections for the specific model
being installed. Install the provided terminal block jumpers in the terminal block that the field wiring
connections are being made to as shown in the appropriate wiring diagram.
General Guidelines
In the absence of local codes refer to the latest edition of one of the following:
National Electrical Code, ANSI/NFPA 70-20XX (USA) which can be obtained from:
The National Fire Protection Association
Batterymarch Park
Quincy, MA 02269
Verify that the power supply conforms to the electrical rating listed on the data plate.
Ensure that the appliance is grounded (earthed).
To Next Page
Loading...