What to do if my Black & Decker BCD700S battery pack will not charge?
If the Black & Decker Drill's battery pack isn't charging, first ensure the charger is properly plugged into a working outlet. Also, the surrounding air temperature may be too hot or too cold. Move the charger and battery pack to an environment where the air temperature is above 40 degrees F (4.5ºC) or below 105 degrees F (40.5ºC).
Why does my Black & Decker BCD700S Drill shut off abruptly?
If your Black & Decker Drill shuts off abruptly, it could be that the battery pack has reached its maximum thermal limit or is out of charge. To resolve this, allow the battery pack to cool down, then place it on the charger and allow it to charge fully. The drill is designed to shut off abruptly when the charge is depleted to maximize the battery pack's lifespan.
What to do if my Black & Decker Power Screwdriver battery pack will not charge?
If the battery pack for your Black & Decker Power Screwdriver isn't charging, make sure the charger is plugged into a working outlet. Also, ensure the surrounding air temperature is above 40 degrees F (4.5ºC) or below 105 degrees F (40.5ºC). Move the charger and battery pack if the temperature is outside this range.
Why does my Black & Decker Power Screwdriver shut off abruptly?
If your Black & Decker Power Screwdriver shuts off abruptly, it might be because the battery pack has reached its maximum thermal limit or is out of charge. To resolve this, allow the battery pack to cool down and then place it on the charger to recharge.
General| Power Source | Cordless |
|---|---|
| Voltage | 18V |
| Battery Type | Lithium-Ion |
| Chuck Size | 10 mm |
| No Load Speed | 0-360/0-1400 RPM |
| Weight | 1.3 kg |
To Next Page
