Why is my Black & Decker BEPW2200 leaking water from the pump?
If water leaks from the pump of your Black & Decker Pressure Washer, make sure that all fittings are tight. If the water seals are damaged or worn, contact your local dealer.
What to do if Black & Decker BEPW2200 Pressure Washer has no detergent?
If there's no detergent, the container might be empty (add more detergent), the bottle or suction tube may not be properly connected (check connections), the detergent could be too thick (use detergent recommended for pressure washers only), the filter on the suction tube could be clogged (run warm water through it), the suction tube might be damaged or clogged (remove obstruction or replace it), or the discharge nozzle is obstructed (blow out or remove debris).
Why Black & Decker BEPW2200 Pressure Washer unit does not reach high pressure?
The unit may not reach high pressure if the water faucet isn't fully turned on (open the water valve fully), the water inlet filter is clogged (remove and rinse to clean), the nozzle is worn (replace with a new nozzle), the pump is sucking air (check that hoses and fittings are airtight, turn OFF the machine and purge the pump by squeezing the trigger gun until a steady flow of water emerges from the nozzle), the water supply is restricted (check the water hose for kinks, leaks, and blockages). Also, the unit may not be properly self-primed.
General| Brand | Black & Decker |
|---|---|
| Model | BEPW2200 |
| Category | Pressure Washer |
| Language | English |
Essential safety guidelines, warnings, and precautions for operating the pressure washer.
Guidelines for protecting others and understanding the meaning of tool labels and symbols.
Instructions for connecting the main handle and the spray handle to the unit.
Steps for attaching high pressure hose, garden hose, and connecting nozzles.
Steps to prepare the cleaning surface, the unit, and the spray handle.
Instructions for connecting the water supply and using detergents for cleaning.
How to start the unit, clean surfaces, and handle the spray wand.
Procedures for cleaning the pressure washer unit and its components for optimal care.
Steps for cleaning clogged nozzles and maintaining the water inlet filter.
To Next Page
