14
TOASTING
Important: It is not necessary to preheat the oven for toasting.
1. Place up to 4 slices of bread on slide rack.
2. Close oven door.
3. Press the TOAST
button.
4. The first time TOAST
is selected the digital display will show “4”
flashing and 4 bars will be shown to the left on the digital display.
5. The ON indicator light blinks; you have 5 seconds to proceed.
6. To change the shade level press
▲
or
▼
. There are 7 settings
available on this oven.
7. Press START button to begin toasting.
8. The ON indicator light becomes constant and remains on until
toasting cycle is complete.
9. When toast cycle is complete, there will be an audible signal. The
oven and the on indicator light will go off.
Note: For your convenience, the oven is designed to remember the last
selected shade level, unless unplugged.
10. Open the oven door. Using oven mitts or pot holders, slide the rack
out to remove the toast.
Caution: This oven gets hot. When in use, always use oven mitts or
potholders when touching any outer or inner surface of the oven.
11. Unplug appliance when not in use.
Important: Make sure toaster oven is off and has cooled completely
before connecting or disconnecting any other †SpaceMaker™ appliance
from the Save-A-Plug™ outlet.
TOAST TIPS
• You may press the CANCEL button at any time to discontinue toasting.
• For best results on first toasting cycle set the toast selector to setting 4, then
readjust for next cycle to lighter or darker to suit your preference.
• When repeating the toast cycle immediately, it is suggested that the toast
shade selector be set to a slightly lighter setting.
To Next Page
Loading...
Need help?
General
