Page 13
877-877-2269 | blackbox.com
Chapter 2: Overview
Table 2-2. Back panel components.
Number Name Description
1 Power In Power in port, 2-pin pluggable terminal block, connects to
12-VDC power adapter.
2 Power out Power out port, connects to AVS-CTRL8 to power it with a
12-VDC power output.
3 RS-232 serial port Connects to a far-end receiver, supports bi-directional RS-232
control leads (sends the control signal from local devices or
receives the control signal sent from far-end devices.
To Next Page
Loading...
Need help?
General