Black Box LB510A - LB510 A Regulatory Compliance Information; FCC Part 15 Radio and TV Interference; EC Declaration of Conformity for LB510 A; FCC Part 68 (ACTA) Statement

G.SHDSL NTU
9
A. Compliance Information
A.1 Radio and TV Interference (FCC Part 15)
This equipment generates and uses radio frequency energy, and if not installed
and used properly—that is, in strict accordance with the manufacturer's instruc-
tions—may cause interference to radio and television reception. This equipment
has been tested and found to comply with the limits for a Class A computing
device in accordance with the specifications in Subpart B of Part 15 of FCC rules,
which are designed to provide reasonable protection from such interference in a
commercial installation. However, there is no guarantee that interference will not
occur in a particular installation. If the equipment causes interference to radio or
television reception, which can be determined by disconnecting the cables, try to
correct the interference by one or more of the following measures: moving the
computing equipment away from the receiver, re-orienting the receiving antenna,
and/or plugging the receiving equipment into a different AC outlet (such that the
computing equipment and receiver are on different branches).
A.2 EC Declaration of Conformity
Product Description: LB510A
We certify that the apparatus identified above conforms to the requirements of
Council Directive 1999/5/EC on the approximation of the laws of the member
states relating to Radio and Telecommunication Terminal Equipment and the
mutual recognition of their conformity.
A.3 FCC Part 68 (ACTA) Statement
This equipment complies with Part 68 of FCC rules and the requirements adopted
by ACTA. On the bottom side of this equipment is a label that contains—among
other information—a product identifier in the format US: AAAEQ##TXXXX. If
requested, this number must be provided to the telephone company.
The method used to connect this equipment to the premises wiring and telephone
network must comply with the applicable FCC Part 68 rules and requirements
adopted by the ACTA.
If this equipment causes harm to the telephone network, the telephone company
will notify you in advance that temporary discontinuance of service may be
The safety advises in the documentation accompanying the
products shall be obeyed. The conformity to the above directive
is indicated by the CE sign on the device.