Black Box ServSwitch User Manual

44
MATRIX SERVSWITCH™
3.5.3 K ERNEL S ERIAL -P ORT M ESSAGES
The Matrix ServSwitch’s kernel writes this message to the serial port at power-up:
Hit space bar within 5 seconds to get serial options menu
If the Switch receives a [Space] character at the serial port during the next
5 seconds, the standard Matrix ServSwitch initialization terminates after writing the
Local ports diagnostic message (see Section 3.5.1), and a serial options menu
appears as described in Section 7.2.
During a firmware upgrade after a kernel error has occurred, any of the
following messages may appear at the serial port:
• Waiting for file
• Receive successful
• Checksum error
• Record error
• Data error
• Receive failed
• Address =
• Try again ? Y/N
• Error in programming flash
• Please try again

Black Box ServSwitch Specifications

General

Brand	Black Box
Model	ServSwitch
Category	Switch
Language	English