Black Stone 2086 - Ignition | Battery Powered; Propane Burner Operation

ENGLISHENGLISH
Owner’s Manual |
blackstoneproducts.com/support
ENGLISH
one half turn
❸
❶
❷
❹
STEP 
In order for the ignitor
button to work properly, ensure that
the battery is installed correctly.
STEP 
❶
Ensure that the control knob is
turned to OFF.
! WARNING
Do not lean over the appli-
ance while lighting.
! WARNING
If ignition does NOT occur
in 5 seconds, turn burner
controls OFF, wait 5
minutes and repeat lighting
procedure.
If burner does not ignite with
open valve, gas will continue
to flow out of burner and
could accidentally/inad-
vertently ignite with risk of
injury.
IGNITION |
BATTERY POWERED
PROPANE BURNER OPERATION
For proper ignition and operation of the appliance follow the steps below.
STEP 
Ensure that the LPG
tank is properly connected to
the unit. Turn gas ON at the LPG
cylinder by slowly turning the OPD
handwheel halfway.
STEP 
❷
Push and hold the ignitor button.
❸
Push and turn the control knob counter-clockwise to HIGH.
(Release the ignitor button when the burner lights.)
❹
Adjust the temperature to desired level.
Ignition | Battery Powered
14
Model 2086