52
SERVSWITCH™ SPECTRA
C. The Spectra’s mouse mode might not be set
correctly. See Section 4.10.
D. Your mouse must be connected to the ServSwitch
Spectra when the CPUs are booted and when mouse
applications are run. Try exiting and re-entering your
application; if this doesn’t work, press the reset button
(see Section 5.1).
5.3.8 Y
OUR
M
ONITOR
D
ISPLAY
I
S
F
UZZY
A. Check the settings of your monitor, especially the
sharpness control.
B. If you can’t solve the problem by changing the
monitor settings, you might have run cable too far;
maximum distance of extension cable from any CPU
to the ServSwitch Spectra is 20 ft. (6.1 m)—or less, if
you are using high-resolution video. You might need
to upgrade from standard cables to coaxial cables
that carry the video signal better. See Section 3.4.
5.3.9 Y
OUR
V
IDEO
I
S
N
OT
S
YNCHRONIZED OR
I
S THE
W
RONG
C
OLOR
A. Check the settings of your monitor, especially the
sync or color controls.
To Next Page
Loading...
