57
APPENDIX A: NVRAM Factory Defaults
Appendix A: NVRAM Factory
Defaults
The table below shows the default values for some of
the ServSwitch Spectra’s options that are stored in non-
volatile memory (NVRAM) when the Spectra is shipped
from the factory. It also shows you both how to change
these settings and how to save the changed settings to
NVRAM, so that they become the new defaults loaded
when the Spectra is powered OFF and back ON again.
Option Factory-Default To Change To Save
Setting Changes
Caps/Scroll/ Num Lock Select port, Can’t be saved
Num Lock ON (fixed) then press the
corresponding
button on the
keyboard
Scan OFF Type [Ctrl] Can’t be saved
S (to turn ON)
or [Ctrl] X
(to turn OFF)
Scan-Delay 5 seconds Type [Ctrl] [Ctrl] K
Time Txx [Enter]
(xx = 1 to 15,
time in seconds)
To Next Page
Loading...
