32
SERVSWITCH™ SPECTRA
Table 4-1 (continued). The ServSwitch Spectra’s Keyboard Commands
Command Keystroke Sequence Description
Stop Audio [Ctrl] G1 or G1 suspends audio
[Ctrl] G2 switching and makes
CPU 1 the uninterrupted
audio source. G2 suspends
audio switching and
makes CPU 2 the source.
Restart [Ctrl] G0 Re-enables normal audio
Audio switching (audio is
Switching switched and scanned
along with keyboard,
video, and mouse).
Send Null [Ctrl] N Causes the Spectra to
Byte to send a null byte to the
Resync CPU’s PS/2 mouse port.
Mouse Enter this command to
correct the selected CPU
if it gets “out of sync” with
the mouse (see Section 4.5).
Reset [Ctrl] O Causes the Spectra to try
Computer’s to get the currently selected
Mouse Port CPU to reset its PS/2
mouse port. Only works if
the CPU is running certain
combinations of recent
Windows operating system
and recent mouse driver.
Identify [Ctrl] I Causes the Spectra to
ROM report the version of ROM
it is using. Enter this command
if you are asked to do so by
a technical-support person.
To Next Page
Loading...
Need help?
General
