Blackbox SERVSWITCH Series - Keep Settings; Set Mouse Mode

33
CHAPTER 4: Operation
Command Keystroke Sequence Description
Keep [Ctrl] K Enter this command after
Settings you enter any of the four
commands listed below
(it saves the new settings
to nonvolatile memory):
Set [Ctrl] Txx [Enter] Sets the time, in seconds,
Scan-Delay (xx = 1 to 15) that the ServSwitch Spectra
Time will pause at each CPU
when scanning.
Set Mouse [Ctrl] Qx [Enter] For the selected CPU, Q1
Mode (x = 0, 1, or 2) translates PS/2 mouse input
to serial mouse output, Q2
forces PS/2 wheel-mouse
output, and Q0 resets to
normal PS/2 non-wheel-
mouse output.
Set [Ctrl] Mx [Enter] Tells the ServSwitch Spectra
Keyboard (x = 1, 2, or 3) the keyboard mode (1, 2, or
Mode 3) of the currently selected
CPU. See Appendix C.
Set
[Ctrl] Axxx Sets the keyboard typematic
Keyboard [Enter] (automatic key-repeat)
Typematic (xxx = decimal value function of the currently
from 0 to 127) selected CPU. Only works
with CPUs that have
standard keyboards and
CMOS that allows users
to
program the typematic
function. See Appendix C.