EasyManua.ls Logo

Blackfin 242 - Drainage System Maintenance

Default Icon
160 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
84
Drainage Systems
9.5 Drainage System Maintenance
It is essential that the following items be done
periodically to maintain proper drainage of your
boat:
• Clean cockpit drain rails with a hose to remove
debris that can block water drainage.
• Clean the hardtop leg drain holes. This is
especially important just before winter lay-
up.
• Clean the bilge pump strainer of debris and
check the bilge for foreign material that can
cause the pump or automatic switch to mal-
function.
• Frequently test the automatic bilge pump
switch for proper operation. This is accom-
plished by touching and holding the test but-
ton on the side of the pump until it activates
(about ve seconds). The pump can also be
activated by ooding the bilge with a garden
hose until it activates.
• Flush all gravity drains with fresh water to keep
them clean and free owing.
• Clean and ush shboxes, coolers and storage
boxes with soap or a bilge cleaner and fresh
water after each use to keep them clean and
fresh.
Note: All drains and pumps must be properly
winterized before winter lay-up.
CAUTION
NEVER USE HARSH CHEMICAL DRAIN CLEANERS IN
MARINE DRAIN SYSTEMS. PERMANENT DAMAGE TO THE
HOSES AND FITTINGS MAY RESULT.
Bilge Pump Test Button
Hold For 5 Seconds Or Until Pump Activates

Table of Contents