________________________________________PL10C / PL20B_____________________________________
17
WARNING
Remove the vertical extension as soon as you have finished the high pull.
REMINDER : Do not carry out any pull without having first correctly installed a safety cable.
VIII) MAINTENANCE
The lift needs no special maintenance because all pivot points and pins are self lubricating. It is however necessary to
thoroughly clean and grease the surfaces on which the mobile leg moves.
Figure 27
- Once a month, oil the tightening screws of the clamps and the locking screws of the Dozer to guarantee them a
longer life.
- Replace the used screws by original screws or of a similar quality.
- Control the oil level regularly, and carry out a draining at least every 5 years.
WARNING
Waste oil should be disposed of according to local legislation.
- In accordance with the legislation, check your lift on a periodic basis.
(Different depending on the country where the equipment is used)
WARNING
Repair jobs MUST be performed by a BLACKHAWK representative.
Do not repair yourself any defect part of the lift or the straightening system.
To Next Page
Loading...