Need help?Do you have a question about the Blackmagicdesign MultiView Series and is the answer not in the manual?
General| Series | MultiView |
|---|---|
| Inputs | SDI |
| Outputs | SDI |
| Screen Type | LCD |
| Power Supply | 12V DC |
Instructions for connecting the power source to your Blackmagic MultiView unit.
Guide on connecting SDI video sources and monitoring displays to the unit.
Details on how to configure the display layout for multiple video sources.
Steps for connecting the Blackmagic MultiView to a network via Ethernet.
Information on establishing serial control connections for the device.
Guidance on installing the Blackmagic MultiView unit into a rack.
Instructions on how to connect and use multiple MultiView units together.
Overview of the front control panel and its functions for settings adjustment.
Procedure for assigning connected SDI sources to different views.
Options for selecting the number of views displayed on the multi view output.
Configuration setting to select the SDI input for embedded audio.
Submenu for enabling or disabling overlay features like borders and labels.
Settings to control video output options, including format and frame rate.
Configuration of network settings such as IP, Subnet, and Gateway addresses.
Step-by-step guide for installing the optional Teranex Mini Smart Panel.
Overview of the features available on the Teranex Mini Smart Panel.
Explanation of the buttons and rotary knob for navigating settings.
Instructions for adjusting settings using the Smart Panel's interface.
Description of the physical DIP switches used for configuration.
Detailed breakdown of switch functions for the MultiView 4 model.
Detailed breakdown of switch functions for the MultiView 4 HD model.
Procedure for installing the Blackmagic MultiView configuration software.
Introduction to the software's main interface and device selection.
How to modify device settings via the computer software.
Customizing input labels for sources within the setup utility.
Customizing view labels for easier identification in control software.
Configuring video output format, resolution, and frame rate.
Adjusting the screen layout for views using the setup software.
Setting up tally overrides and input mapping for tally indicators.
Adjusting the aspect ratio for SD video inputs displayed on the unit.
Enabling/disabling overlay features such as borders, labels, and meters.
Accessing details, overlay, and network settings for device configuration.
Configuring network and serial control parameters for remote operation.
Managing custom input and view label configurations.
Procedure for updating the unit's firmware to the latest version.
Procedure for selecting the connected MultiView unit in the software.
How to check which input is routed to a specific view.
Steps for routing video inputs to desired views within the software.
Using the software to control solo input selection for full-screen monitoring.
Selecting which SDI input's audio is embedded into the multi view output.
Technical details of the Ethernet protocol for controlling the device.
Explanation of the initial state information transmitted by the device.
Information on how the device sends status changes.
How clients can request changes to routes, labels, or locks.
Procedure for requesting a complete state dump from the device.
Method to verify the communication status with the device.
Overview of RS-422 protocol for controlling the device as a slave.
Types of notification messages received when routes change.
List of global commands supported for status reporting and reset.
Commands for changing routes, requesting status, and checking ports.
Commands for queuing, executing, and clearing route changes in salvos.
Guidance on accessing support resources for the product.
Information on finding the latest manuals and support notes.
Details on how to use the online forum for community support.
Methods for contacting the support team for assistance.
How to determine the installed version of the MultiView software.
Guidance on checking for and applying software updates.
Information regarding disposal of electronic equipment and FCC compliance.
Important safety precautions for operating the equipment.
Details of the product warranty, coverage, and service terms.
To Next Page
