Blackweb BWA18AA013 - User Manual

AUX IN
CHARGE
BWA18AA013
RUGGED BLUETOOTH® SPEAKER
Line In Port
POWER BUTTON:
Press and hold the button for 2 seconds to turn device ON/OFF.
VOLUME UP “ + ” BUTTON:
Short press (< 0.5s) the button to turn up volume. Press and hold the button (2s) to go to
the next track.
VOLUME DOWN “ – ” BUTTON:
Short press (< 0.5s) the button to turn down volume. Press and hold (2s) the button to go
to the previous track.
INDICATOR LIGHT STATUS:
Power ON – When the speaker is turned on, a solid blue light will appear momentarily.
Bluetooth pairing indicator – When the speaker is turned on, a ashing blue and
red light indicates speaker is ready to pair. Once paired, the light will turn solid blue then
turn o.
Power OFF – When the speaker is turned o, the indicator light will momentarily turn
solid blue, then turn o.
Battery charging – While speaker is charging, the indicator light will turn solid red.
Once speaker is fully charged it will turn o.
SPEAKER PAIRING:
To pair the speaker, follow these simple steps:
1. Make sure the smartphone, tablet, or computer you’re using with the speaker has
Bluetooth.
2. Turn on the speaker (press and hold the PLAY/PAUSE button for 2 seconds) and look for
the little blinking light.
3. Look for the Blackweb RGD A013 speaker in your device’s Bluetooth list, or click YES.
The device and Bluetooth will nd each other every time, so long as the speaker is set
to Bluetooth and your device’s Bluetooth is on. If you’re connecting to a computer,
you may have some extra steps on that end. You’ll have to get that information from the
computer company.
Auto o: If the speaker is on but is not connected to Bluetooth, it will shut down after 2
minutes. Once paired, if the speaker is paused for 15 minutes or more, it will automatically
shut down.
Volume Down “-” / Previous Track (3s) Button
PLAY/PAUSE Button
USB Charging Port (600mA)
Status Indicator Light
DISCONNECTING DEVICE:
Press “+” and “–” buttons at the same time for up to 4 seconds to disconnect the speaker
from the device and enter into Pairing mode.
CALL HANDLING:
INCOMING CALL:
Answering and hanging up a call – When speaker is paired to your phone, short
press the PLAY/PAUSE button to answer the call. To hang up, short press the PLAY/PAUSE
button.
Move call from speaker to device – If you are on the call and wish to move the call
from the speaker to your device, long press the PLAY/PAUSE button.
Reject an incoming call – To reject an incoming call, long press the PLAY/PAUSE
button (3s).
See below table for clarication.
Situation
Short Press
PLAY/PAUSE Button
Long Press
PLAY/PAUSE Button
First incoming call Pick up call Reject call
On call End call Move call from speaker to device
SPEAKER CONTROLS & FEATURES
Volume Up “+” / Next Track (3s) Button
USB CABLE:
25 cm Micro USB cable.

Summary

Speaker Controls and Features

Power Button Operation

Press and hold the button for 2 seconds to turn the device ON/OFF.

Volume and Track Control

Short press volume up/down; long press for next/previous track.

Indicator Light Status Guide

Describes solid blue for power, flashing blue/red for pairing, solid red for charging.

Bluetooth Pairing Procedure

Steps to pair the speaker with a Bluetooth-enabled device.

Call Handling Functions

How to answer, hang up, move, or reject calls using the speaker.

Important Safety Information

General Operational Safety

Avoid water, drops, use as intended, keep away from heat, dry surfaces.

Product Usage and Liability

Use only intended attachments, Blackweb not liable for device damage.

Environmental and Battery Care

Dispose of non-replaceable battery responsibly; contains small parts.

California Proposition 65 Warning

Product contains chemicals known to cause cancer and reproductive harm.

Blackweb BWA18AA013 Specifications

General

Brand	Blackweb
Model	BWA18AA013
Connectivity	Bluetooth
Charging Time	3 hours
Water Resistance	IPX5
Color	Black
Product Type	Bluetooth Speaker