EN
9
1. If using the recommended speed control, attach the
speed control mount, included with the speed control,
to the bottom side of the battery plate. Secure a hook
and loop strap between the battery plate and the
speed control mount, as shown.
2. Clip the speed control in the speed control mount.
3. Connect the motor leads to the speed control.
4. Attach the battery mounting plate between the frame
sides using six 3x10mm screws and medium thread-
locking compound. Place a second hook and loop
strap under the plate. The straps should exit through
the gaps in the frame sides.
Hook and
loop straps
Hook and
loop strap
Step F7
To Next Page
Loading...
