TROUBLESHOOTING
If the oven does not operate:
The oven may be unplugged from the power source or switched off at the power source.
The household fuse has blown or household power supply is off.
The Timer (if available) may not set correctly.
If the oven does not heat:
The heat may not be set correctly with the oven’s temperature setting.
If the interior lighting lamp does not light:
The lamps are defective. If they are defective, you can change them following the instructions within
this manual.
Cooking (if lower-upper part does not cook equally):
Control the shelf locations, cooking period and heat values according to the manual.
Unit smoking when first used:
This is a result of protective oils being removed and is to be expected with a first use.
Clock Flashing on Display
Power failure or interruption
Error Codes on Display
If an abnormal condition is detected for more than one, a failure occurs, disabling any cooking function,
setting off an alarm and displaying an error code in the display. If switching the power off and on does not
reset the error, please call your Authorised Service Centre.
ERROR CODE DESCRIPTION
E1 Temperature sensor broken.
E2 Temperature sensor shorted out.
E4 Temperature sensor circuit failure.
E8 Door latch time-out.
E16 Not used.
E32 Not used.
E64 Mode selector disconnected & cannot be reset.
OTHER Sum of any combination of the above.
If you have any further problems with your product, please call your Authorised Service Centre.
To Next Page
Loading...
