1-7D Operating Instructions
Operation
6.6 Safety shutdown
The machine must be put to its safety off position before starting
repair works. See Chapter 2 “Safety instructions”.
6.7 Restarting after a fault
See Chapter 5 “Initial operation“.
All persons in the proximity of the machine when in operation, must
wear safety glasses with lateral protection as well as safety shoes.
The operator is obliged to wear close-fitting protective clothing.
6.8 Measures before and after long standstills
Standstill of the machine for a maximum of 3 months.
Before a long standstill period
Switch off the machine (see Chapter 6.4).
Protect the electric motors from moisture, heat, dust and shocks.
Clean the machine and cover it with a plastic foil.
Preserve bright parts of the machine and power pack with Tectyl 506,
for example, or a similar preservative.
After a long standstill period
See Chapter 5 “Initial operation”.
5
To Next Page
