Operating Instructions BMP-E165
Section 1 - Safety Precautions April 2006
© Blastrac April 2006
10
1.7 Maintenance Mode
Prior to inspecting BMP-E165 components and attached components, verify that
the machine is placed in Maintenance Mode as described below.
Maintenance Mode
Maintenance mode is defined as the state or condition of the BMP-E165, which
minimizes mechanical and electrical hazards.
The BMP-E165 should be put into Maintenance Mode prior to making
adjustments or attempting any maintenance. The steps for placing the BMP-
E165 in maintenance mode are listed below.
1. Move the BMP-E165 to level ground.
2. Press Off Button located in control panel.
3. Verify all moving parts have stopped.
4. Secure the BMP-E165 against movement due to gravity.
5. Utilize Lock-Out/Tag-Out procedures to verify machine will not be
inadvertently energized during maintenance.
To Next Page
Loading...
