12
DVD/CD/USB/microSDHC playback | Bluetooth mode
[ ] Switch repeat function for movie or folder
on/o.
[
] Adjust image.
[
] Select playback language (only if supported
by the movie).
[
] Show subtitles (only if supported by the
movie).
Image playback from DVD/CD, USB or
microSDHC
Select the desired source via the main menu.
The device changes to the desired source and the
playback starts.
If the playback does not start with the image playback,
press the button to change to the folder/file
list.
Press the button to display all the folders and
files of the data carrier.
- Or -
Press the button to display all the images of
the data carrier.
Note:
Folders and images are selected and started as
described under audio playback.
Bluetooth mode
The Bluetooth® function allows registering cell phones
and media playback devices with the car sound system.
When you register a cell phone with the car sound system,
you can make phone calls with the built-in hands-free
function. You can access the lists of dialled numbers and
the phone book of the registered cell phone.
If the connected Bluetooth® device supports the
functions A2DP and AVRCP, you can play the music via
the car sound system and control the playback. During
a call, the music playback is interrupted and continued
again after the call.
If a cell phone is registered via Bluetooth® and a call is
received during the playback of another source, the
source playback is interrupted and the call menu is
displayed.
Starting Bluetooth mode
In the main menu, press on Bluetooth .
The Bluetooth® menu is displayed. It contains the list
of known Bluetooth® devices. Other audio sources
are switched o.
[ ] Add new Bluetooth® device.
[
] Display options menu.
Press the Connect button of the Bluetooth® device
with which you want to establish a connection.
When the device is in range, the connection is
established and the menu for the device is displayed.
Press the Delete button if you want to delete the
Bluetooth® device from the list.
Registering Bluetooth devices
If you want to register a device with the car sound system
for the rst time, proceed as follows:
Ensure that Bluetooth® is activated at the car sound
system and at your Bluetooth® device.
In the options menu of the Bluetooth® mode, enter a
pairing code (see Bluetooth® settings).
Search for new devices/connections on your
Bluetooth® device.
The car sound system appears as "BLAUPUNKT" in
the list of Bluetooth® devices.
Establish the connection; you may have to enter the
pairing code that was previously entered on the car
sound system.
The connection is being established and the menu
for the registered device is displayed.
Note:
If a telephone is connected with the car sound
system, the Bluetooth® icon
is displayed at the top
right edge of the display in all audio/video sources.
Telephone mode
If you connected a phone with the car sound system via
Bluetooth®, the following menu appears.
To Next Page
Loading...
Need help?
General
