Blaupunkt ASPEN IVDM-7003 - Amplifier Connection; Travelpilot DX-V Connection; Video Connection; Audio Connection

11
ENGLISH
5. Amplifier connection
The tuner/amplifier box provides a va-
riety of inputs and outputs with which
additional components can be con-
nected (see Fig. 6).
99
99
9 Connectors for loudspeaker, pow-
er supply etc.
::
::
: CD changer connection
;;
;;
; Control unit connection
<<
<<
< Digital out connection (only Chica-
go IVDM-7003)
==
==
= Video input for the reversing cam-
era
>>
>>
> Audio input for the telephone
??
??
? Audio input for the navigation
@@
@@
@ Audio / video input AUX 1
AA
AA
A Audio / video output 1
BB
BB
B Pre-amplifier output to centre loud-
speaker
CC
CC
C Pre-amplifier output
DD
DD
D Radio antenna input
EE
EE
E Audio / video input AUX 2
FF
FF
F Audio / video output 2
GG
GG
G Pre-amplifier output to subwoofer
HH
HH
H Connections for the IVSC-5502 or
IVSC-3302 via connecting cable
7 607 001 605
The connection should be made using
the appropriate accessories from Blau-
punkt.
Your dealer will be glad to tell you
about this.
6. TravelPilot DX-V connec-
tion
6.1 Video connection
Connect the video output from the
TravelPilot using a connecting cable
7 607 001 602 (4 m) or 7 607 001 601
(1.5 m) and the adapter cable 8 619
002 421 to the input of the control unit
(see Fig. 7).
6.2 Audio connection
Plug the adapter cable 8 619 002 600
into the TravelPilot’s D-chamber, and
connect it to the audio input
??
??
?. Join
the adapter cable’s free lead to the
navigation mute lead
33
33
3 of the adapt-
er cable 8 619 003 045 (see Fig. 7).
Montage
7. Reversing camera
7.1 Reversing light connection
Connect the reversing light to Pin 3 of
chamber A of the vehicle-specific
adapter (see Fig. 1). Use the included
cable end
88
88
8 for this. The Aspen/Chi-
cago IVDM-7003 will switch on auto-
matically when reverse gear is en-
gaged.
7.2 Reversing camera connection
Connect the camera’s video outputs to
the video input
==
==
=. Follow the camera’s
fitting instructions (see Fig. 8).
8. Connection diagrams
Power connection on
vehicle-specific connector ....... Fig. 1
Loudspeaker connection ......... Fig. 1
Connection of the connecting
cable ........................................ Fig. 2
TravelPilot DX-V connection ... Fig. 2
Fitting the
Aspen/Chicago IVDM-7003 .... Fig. 3
Removing the
Aspen/Chicago IVDM-7003 .... Fig. 4
Mounting the tuner box ........... Fig. 5
Box pin assignments ............... Fig. 6
TravelPilot DX-V connection ... Fig. 7
Reversing camera connection Fig. 8
2 EA Chicago IVDM-7002 GB 10.05.2005, 16:23 Uhr11