Blaupunkt ASPEN IVDM-7003 - Audio Setup; Setting the Input Level for External Audio Sources; Setting Dolby Prologic 2 (Chicago IVDM-7003 Only)

60
Audio setup
Setting the input level for external audio sources
1. Touch the
Setup
Setup
button on the touch screen menu and
then touch the
button.
✔ The “Input Level” AUDIO submenu appears.
EXIT
EXIT
NEXTNEXT
Input Level
Input Level
AUX1
AUX1 4V2V2V
2V2V 4V
AUX2
AUX2
2. Select “AUX1” or “AUX2” by touching it.
3. Touch the desired input voltage.
4. To confirm the setting, touch the
EXIT
EXIT
button.
5. Repeat steps 2 - 4 to perform additional settings, or
5. touch the
EXIT
EXIT
button to exit the menu.
Setting Dolby ProLogic 2 (Chicago IVDM-7003 only)
1. Touch the
Setup
Setup
button on the touch screen menu and
then touch the
button.
2. Touch the
button.
✔ The “Audio Effect Control” AUDIO submenu is displayed.
3. Activate “ProLogic2” by touching it.
EXIT
EXIT
NEXTNEXT
ProLogic2
ProLogic2
DownMIX
DownMIX
BALANCE
BALANCE
FADER
FADER
ProLogic MusicOFFOFF
OFFOFF
+0+0
Studio Hall Church
+0+0
Audio Effect Control
Audio Effect Control
SFC
SFC
OFF StereoStereo Lt/Rt
The following settings are available:
OFF > ProLogic > Music > Movie > Matrix
4. Touch the desired setting. Touching the
or
button displays additional setting options.
5. Touch the
EXIT
EXIT
button twice to exit the menu.
AUDIO setup menu
BA IVDM-7003 Teil 3 GB 03.02.2006, 8:34 Uhr60