Blaupunkt BRISBANE SD48 7 648 000 310 - Page 29

Press the or button 2 to change
the value.
When you have fi nished making your chang-
es,
press the MENU button >.
To exit the menu,
press the ESC button <.
Adjusting TREBLE
To adjust the level of the treble,
press the MENU button >.
The display shows "MENU".
Press the
or button 2 repeatedly
until "AUDIO" appears on the display.
Press the
button 2 to call up the
audio menu.
"BASS" appears on the display.
Press the
or button 2 repeatedly
until "TREBLE" appears on the display.
Press the
button 2 to call up the
submenu.
"TREBLE" and the currently set value for the
level are displayed.
Press the
or button 2 to change
the value.
When you have fi nished making your chang-
es,
press the MENU button >.
To exit the menu,
press the ESC button <.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Adjusting E-BASS
To set the frequency and the quality factor
of the bass,
press the MENU button >.
The display shows "MENU".
Press the
or button 2 repeatedly
until "AUDIO" appears on the display.
Press the
button 2 to call up the
audio menu.
"BASS" appears on the display.
Press the
or button 2 repeatedly
until "ENHANCED" appears on the dis-
play.
Press the
button 2 to call up the
submenu.
"E-BASS" appears on the display.
Press the
button 2 to call up the
submenu.
"FREQ" and the currently set value are dis-
played.
Press the
or button 2 to se-
lect between "FREQ" (frequency) and
"QFAC" (quality factor).
Press the
or button 2 to change
the selected setting.
When you have fi nished making your chang-
es,
press the MENU button >.
To exit the menu,
press the ESC button <.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
66
Sound
02_Brisb_VictoriaSD48_gb.indd 6602_Brisb_VictoriaSD48_gb.indd 66 23.11.2007 16:13:40 Uhr23.11.2007 16:13:40 Uhr