Blaupunkt BRISBANE SD48 7 648 000 310 - Page 30

Adjusting E-TREBLE
To adjust the frequency of the treble,
press the MENU button >.
The display shows "MENU".
Press the
or button 2 repeatedly
until "AUDIO" appears on the display.
Press the
button 2 to call up the
audio menu.
"BASS" appears on the display.
Press the
or button 2 repeatedly
until "ENHANCED" appears on the dis-
play.
Press the
button 2 to call up the
submenu.
"E-BASS" appears on the display.
Press the
or button 2 repeat-
edly until "E-TREBLE" appears on the
display.
Press the
button 2 to call up the
submenu.
"FREQ" (frequency) and the currently set
value are displayed.
Press the
or button 2 to change
the selected setting.
When you have fi nished making your chang-
es,
press the MENU button >.
To exit the menu,
press the ESC button <.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Adjusting E-MIDDLE
To set the gain, the frequency and the qual-
ity factor of the middle,
press the MENU button >.
The display shows "MENU".
Press the
or button 2 repeatedly
until "AUDIO" appears on the display.
Press the
button 2 to call up the
audio menu.
"BASS" appears on the display.
Press the
or button 2 repeatedly
until "ENHANCED" appears on the dis-
play.
Press the
button 2 to call up the
submenu.
"E-BASS" appears on the display.
Press the
or button 2 repeat-
edly until "E-MIDDLE" appears on the
display.
Press the
button 2 to call up the
submenu.
"GAIN" and the currently set value are dis-
played.
Press the
or button 2 to select
between "GAIN", "FREQ" (frequency)
and "QFAC" (quality factor).
Press the
or button 2 to change
the selected setting.
When you have fi nished making your chang-
es,
press the MENU button >.
To exit the menu,
press the ESC button <.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
67
ENGLISH
Sound
02_Brisb_VictoriaSD48_gb.indd 6702_Brisb_VictoriaSD48_gb.indd 67 23.11.2007 16:13:40 Uhr23.11.2007 16:13:40 Uhr