10
Confirmation beep
For some functions you will hear a con-
firmation beep if you keep a button
pressed for longer than two seconds.
For instance, after storing a radio sta-
tion to a station button you will hear a
confirmation beep. The beep can be
switched on/off.
➮ Press the MENU button 9.
➮ Press the
or button : repeat-
edly until “BEEP” appears in the
display.
➮ Use the
or button : to switch
between the options.
“OFF” means beep off, “ON” means the
beep is switched on.
➮ Press the MENU button 9.
Automatic sound
(only KEY WEST MP36)
This feature automatically adjusts the
volume of the car sound system to suit
the speed at which the vehicle is travel-
ling. In order for this to work, your car
sound system must be connected as
described in the installation instructions.
You can adjust the automatic volume
boost feature in six steps from (0 to 5).
➮ Press the MENU button 9.
➮ Press the or button : repeat-
edly until “AUTO SD” appears in
the display.
➮ Set the volume adjustment level
(0 - 5) using the
buttons :.
When you have finished making your
changes,
➮ press the MENU button 9 twice.
Note:
● The optimum setting (0 - 5) for the
speed-dependent volume adjust-
ment feature depends on how
noise levels develop in your partic-
ular vehicle. You will need to test
various settings in order to find out
which is best suited to your vehicle.
ADJUSTING THE VOLUME
KEYWESTMP36_EN2 3/15/06, 4:38 PM10
To Next Page
Loading...
Need help?
General
