23
FRANÇAIS
ENGLISH
ESPAÑOL
PORTUGUÊS
Setting the middle centre frequency
You can choose between four centre
frequencies: 500 Hz, 1 kHz, 2 kHz, and
3 kHz.
➮ Whilst the treble setting is being
displayed, press the
or button
: to choose between the four
possible centre frequencies.
When you have finished making your
changes,
➮ press the AUDIO button 5 twice.
Adjusting the subwoofer
settings (only KEY WEST MP36)
You can boost or cut the subwoofer
settings in eight steps (0-7).
Adjusting the subwoofer boost
➮ Press the AUDIO button 5.
“BASS” appears in the display.
➮ Press the
or button :
epeatedly until “SUBOUT” appears
in the display.
➮ Press the
or button : to ad-
just the subwoofer boost.
Setting the subwoofer cut-off
frequency
You can choose between four cut-off
frequencies: 0 Hz, 80 Hz, 120 Hz and
160 Hz.
➮ Whilst the subwoofer setting is
being displayed, press the or
button : to choose between the
four possible frequencies.
When you have finished making your
changes,
➮ press the AUDIO button 5 twice.
Setting the left/right volume
distribution (balance)
➮ To set the left/right volume distribu-
tion (balance), press the AUDIO
button 5.
“BASS” appears in the display.
➮ Press the
button : repeatedly
until “BAL” appears in the display.
➮ Press the
or button : to
adjust the balance (right/left).
When you have finished making your
changes,
➮ press the AUDIO button 5.
Setting the front/back volume
distribution (fader)
➮ To set the front/back volume distri-
bution (fader), press the AUDIO
button 5.
“BASS” appears in the display.
➮ Press the
button : repeatedly
until “FADER” appears in the dis-
play.
➮ Press the
or button : to ad-
just the fader (front/back).
When you have finished making your
changes,
➮ press the AUDIO button 5.
TONE AND VOLUME DISTRIBUTION SETTINGS
KEYWESTMP36_EN2 3/15/06, 4:38 PM23
To Next Page
Loading...
Need help?
General
