Blaupunkt Key West MP36 - CLOCK - Time; Briefly Displaying the Time; Setting the Time; Selecting 12;24-Hour Clock Mode

21
FRANÇAIS
ENGLISH
ESPAÑOL
PORTUGUÊS
CLOCK - Time
Briefly displaying the time
➮ To display the time, briefly press
the DISPL
button 8.
Setting the time
➮ To set the time, press the MENU
button 9.
➮ Press the
or button : repeat-
edly until “CLOCK SET” appears in
the display.
➮ Press the
button :.
The time appears in the display. The
minutes flash on and off and can be
adjusted.
➮ Adjust the minutes using the
or
button :.
➮ Once you have set the minutes,
press the
button :. The hours
start flashing.
➮ Adjust the hours using the
or
button :.
When you have finished making your
changes,
➮ press the MENU button 9 twice.
Selecting 12/24-hour clock
mode
➮ Press the MENU button 9.
➮ Press the
or button : repeat-
edly until “12H MODE” or “24H
MODE” appears in the display.
➮ Press the
or button : to
switch between the modes.
When you have finished making your
changes,
➮ press the MENU button 9.
Displaying the time continuously
when the unit is off and the
ignition is on
“CLOCK ON” setting in the menu allows
you to display the time when the unit is
off and the vehicle ignition is on,
➮ press the MENU button 9.
➮ Press the
or button : repeat-
edly until “CLOCK OFF” or
“CLOCK ON” appears in the dis-
play.
➮ Press the
or button : to
switch between the ON/OFF set-
tings.
When you have finished making your
changes,
➮ press the MENU button 9.
Briefly displaying the time when
the unit is switched off
To briefly display the time when the unit
is off,
➮ press the DISPL
button 8.
The time is displayed for eight seconds.
CLOCK - TIME
KEYWESTMP36_EN2 3/15/06, 4:38 PM21