Blaupunkt Melbourne C30 User Manual

16
CLOCK
Displaying the clock briefly
➮ To display the time briefly, press
/ DIS 7 briefly.
Setting the time
➮ To set the time, press MENU 8.
“MENU” will appear in the display.
➮ Press : until “CLOCKSET” ap-
pears in the display.
➮ Press :.
The time will appear in the display. The
minutes will flash and can be altered.
➮ Press or : to alter the min-
utes.
➮ Once you have altered the min-
utes, press :. The hours will
begin to flash.
➮ Press or : to alter the
hours.
➮ Once you have set the time, press
MENU 8 or OK ; twice.
Selecting the 12/24-hour time
display mode
➮ Press MENU 8.
“MENU” will appear in the display.
➮ Press : repeatedly until “24 H
MODE” or “12 H MODE” appears
in the display.
➮ Press or : to switch the dis-
play mode.
➮ Once you have selected the mode,
press MENU 8 or OK ;.
Activating the clock for display
when the car audio system is
switched off
➮ To activate the clock for display
when the car audio system is
switched off, press MENU 8.
“MENU” will appear in the display.
➮ Press : repeatedly until “CLK
DISP OFF” or “CLK DISP ON” ap-
pears in the display.
➮ Press or : to switch the
clock display on or off.
➮ Once you have made the setting,
press MENU 8 or OK ;.
Displaying the time briefly when
the car radio is switched off
To display the time briefly when the car
radio is switched off,
➮ press / DIS 7.
The time will then appear in the display
for eight seconds.
CLOCK

Blaupunkt Melbourne C30 Specifications

General

Brand	Blaupunkt
Model	Melbourne C30
Category	Car Receiver
Language	English