11
FRANÇAIS
ENGLISH
ESPAÑOL
PORTUGUÊS
do so, repeatedly press the joystick
up or down until the required
number appears in the display.
➮ You can move the input cursor by
pressing the joystick 7 to the left
or right.
➮
If the master code is displayed correct-
ly, press the joystick OK button
7.
The new KeyCard is accepted as soon
as the unit switches to playback mode
and “KEYCARD OK” appears briefly in
the display.
Notes:
● If you accidentally entered the
master code incorrectly, you can
enter it again after waiting for a
short time.
● If the master code is entered incor-
rectly three times, you will have to
wait for one hour. “WAIT 1 H” ap-
pears in the display. The unit must
not be switched off during this
waiting period! After the hour has
passed, “TURN OFF” appears in
the display. Now switch the unit off
and proceed as described in the
section entitled “Preparing a new
KeyCard / entering the master
code”. You will then be able to en-
ter the master code again.
Looking after the KeyCard
Keeping the contacts free from dirt and
other particles will ensure that the Key-
Card functions properly. Avoid making di-
rect skin contact with the contacts.
If necessary, clean the KeyCard contacts
with a lint-free cloth and some alcohol.
Switching on/off
There are various ways of switching the
unit on/off.
Switching on/off using button
1
➮ To switch the unit on, press button
1 until you feel the latch open and
the button pushes out.
The unit switches on.
➮ To switch the unit off, press button
1 until you feel it click into place.
The unit switches off.
Switching on/off using the
vehicle ignition
If the device is correctly connected to
the vehicle’s ignition and the unit was
not switched off using button 1, it will
switch on/off simultaneously with the
ignition.
You can switch the unit on even if the
ignition is off.
➮ To do so, press button 1 so that
you feel it unlatch and push out.
Note:
To protect the vehicle battery, the unit
will switch off automatically after one
hour if the ignition is off.
THEFT PROTECTION SWITCHING ON/OFF