EasyManuals Logo

Blaupunkt Toronto MP73 Operating Instructions

Blaupunkt Toronto MP73
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
32
Automatically calibrating the
equalizer
You can electronically calibrate and
store values for three different situations.
EQ 1 for the driver only
EQ 2 for the driver and front
passenger
EQ 3 for the front and rear occupants
Hold the calibration microphone in the
appropriate position whilst the calibra-
tion is taking place.
The position of the calibration micro-
phone for situation 1 (e.g. for the driver
alone) is at the height of the driver's
head.
For situation 2, the calibration micro-
phone is between the driver and pas-
senger.
For Situation 3, it is in the middle of the
vehicle interior (left/right, front/back).
Really quiet surroundings are required
for the calibration. Any extraneous noise
will distort the measured values.
Note:
During calibration, the temperature in-
side the vehicle must not exceed 55 °C
since this could lead to falsified meas-
urements.
The sound radiating from the loud-
speakers must not be obstructed by any
objects. All the loudspeakers must be
connected. The microphone must be
connected to the unit.
To calibrate an equalizer,
Press the DEQ+ button 5.
Press the softkey 4 assigned to
the USER display item.
Press the softkey 4 assigned to
the display item of the equalizer
that you want to configure.
Press the softkey 4 assigned to
the AUTO display item.
You will hear a test sound, and calibra-
tion takes place.
Proceed as described for all the
equalizers.
Selecting an equalizer
After calibration has taken place or you
have finished making manual adjust-
ments,
press the DEQ+ button 5.
Press the softkey 4 assigned to
the USER display item.
Select one of the equalizers EQ1,
EQ2 or EQ3 using the corre-
sponding softkeys 4.
Press the joystick OK 7 or the
DEQ+ button 5 to close the
menu.
The settings are saved.
Selecting sound presets
You can select sound presets for the
following music types.
VOCAL (VOCL)
DISCO (DISC)
ROCK
TECHNO (TECH)
CLASSIC (CLAS)
The settings for these music styles have
already been programmed.
Press the DEQ+ button 5.
EQUALIZER

Table of Contents

Other manuals for Blaupunkt Toronto MP73

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Blaupunkt Toronto MP73 and is the answer not in the manual?

Blaupunkt Toronto MP73 Specifications

General IconGeneral
BrandBlaupunkt
ModelToronto MP73
CategoryCar Receiver
LanguageEnglish

Related product manuals