20
Selecting special destinations (car parks, petrol stations, etc.)
Using the icon (petrol pump / cup) you have access to various destinations. You
can select these destinations according to your current location (“Location”), the last
active navigation destination (“Last destination”), any place (“Surrounding area”) or
non-urban destinations (e.g. border crossings, airports). In the case of “Location” and
“Last destination”, the destinations are sorted according to their distance, in the case
of “Surrounding area” they are displayed alphabetically.
Plus Point: This is helpful, for instance, when you are looking for the nearest
petrol station.
The available special destinations differ according to your location or the area around
your destination and they refer to an area of approximately 12 mi radius (50 mi in the
case of airports). The exact radius depends on the navigation CD-ROM.
1. To select a special destination, select the
icon in the “Destination”
menu. Press the
OK
button.
The “Special destinations” menu is displayed. ✔
2. Move the selection bar to the desired reference point (“Location”, “Last desti-
nation” or “Surrounding area”). Press
OK
.
3. If you select “Surrounding area”, you must have first entered the place at
which you want to select a surrounding destination.
Plus Point: Enter the destination here in the same way as described for the
direct destination entry.
Once you have determined the town/city, the list of destinations will appear. ✔
4. Select the required special destination. Press the
OK
button.
The list of available destinations is displayed. ✔
5. Select the desired destination. Press
OK
.
The name of the destination will appear in a menu. ✔
The selection marker is positioned over the
icon. You can now start
route guidance using the
OK
button. For further details, read the chapter en-
titled “Route Guidance”.
Entering destinations
To Next Page
Loading...
