54
Deleting the whole tour
1. If you would like to delete a tour completely from the tour memory, mark
on the top line of the tour memory. Press
OK
.
The “Tour memory - Edit” menu will appear. ✔
2. Mark “Delete whole tour”. Press
OK
.
A pop-up inquiry requiring confirmation will appear. ✔
3. Mark “Yes”. Press
OK
.
The “Tour memory - Edit” menu will appear. ✔
Starting route guidance to a tour destination
1. If you want to start route guidance, mark on the top line of the tour
memory. Press
OK
.
The tour list will appear. ✔
2. Mark the destination on the tour list for which you want to start route guid-
ance. Press
OK
.
An information menu containing the destination data will appear. ✔
You will hear the following voice output: “The route to your intermediate des-
tination is being calculated.”
After you have reached the first tour destination, route guidance will start automatical-
ly to guide you to the next destination on the tour list.
Plus Point: The tour can be started from any destination. Once you reach the
final destination in the tour, the map display appears automatically.
Tour memory
To Next Page
Loading...
