Anhang
Allgemeines Kurzanlei- TourenZieleingabe Zielspeicher Einstellun-
63
Other settings
1. Mark on the top line of the “Settings” menu. Press
OK
.
The sub-menu for other settings will appear. ✔
Setting the clock
You can set daylight-savings time, the current time, the display of the arrival or driving
time and select the time display format as well.
The minutes are normally set automatically via GPS. You have to set the hours
manually.
1. Select the “Clock” menu item. Press the
OK
button.
The “Clock” menu is displayed. ✔
2. Select the “Time” menu item. Press the
OK
button.
The menu for adjusting the time is displayed and the hours are marked. ✔
3. Set the required local time (hours) using the buttons.
Press the
OK
button.
The local time that you set appears alongside the menu item. ✔
Note
If need be, you can also set the minutes in the same way. However, please
note that you can only set the minutes in 30-minute steps if a time adjust-
ment has already taken place via GPS.
The clock will not switch to daylight-savings time or standard time automatically; this
adjustment must be made manually.
4. Select “Dayl. sav. time”. Press
OK
.
Daylight-savings time has been selected when there is a checkmark next to
the menu item. ✔
5. Press to exit the menu.
System settings
To Next Page
Loading...
