Blaupunkt TravelPilot DX-V - Selecting the Type of Map Display

Anhang
Allgemeines Kurzanlei- TourenZieleingabe Zielspeicher Einstellun-
31
Route guidance
Overview
1 Driving direction arrow indicates the vehicle position and the direction in
which you are travelling.
2 Information on the remaining travel time / arrival time, distance to the desti-
nation and - when coming up to a turning - the arrow symbol and distance
bar
3 Information including the map scale, TMC station name and compass rose
4 The calculated route is indicated in colour on the map display.
5 Name of the road being driven down, time and status display of the TMC
traffic congestion function.
6 Name of the next suggested road into which you should turn.
7 Map information (car parks, petrol station, etc.)
8 Distance to the next decision point
Selecting the type of map display
You have the option of displaying the map for your current location, the map for your
destination or the overview map covering the whole route.
Selecting the current location map (north, direction of travel, junction zoom)
In the “Location map” display, you can choose between three different position map
display modes:
– Map aligned due north (“North”),
– Map aligned with the driving direction (“Direction of travel”),
– Map aligned with the driving direction or due north (depending on the scale);
in addition, the map scale is adjusted accordingly (“Junction zoom”).
Plus Point: If the “Junction zoom” mode is set, the map scale will automati-
cally zoom into the intersection before a turning-off point.
55
55
5
33
33
3
44
44
4
11
11
1
22
22
2
77
77
7
66
66
6
44
44
4
11
11
1
33
33
3
55
55
5
88
88
8
22
22
2