Blaupunkt TravelPilot DX-V - Page 32

32
Route guidance
1. Press the
OK
button to open the drop-down menu.
Select “Settings”. Press the
OK
button.
The “Settings” menu opens. ✔
2. Select “Location map”. Press the button.
A selection of location map display modes appears. ✔
3. Mark the required display mode. Press the
OK
button.
Navigation continues with the selected map. ✔
Selecting the map display for the destination area or the overview map
1. Press the
OK
button to open the drop-down menu.
Select “Settings”. Press the
OK
button.
The “Settings” menu opens. ✔
2. Select the “Destination area” or “Overview” display mode by pressing the
or button. Press the
OK
button.
The map switches to the selected display mode. ✔
Adjusting the map scale
The map scale can be selected freely for every map. Scales ranging from 0.05 mi to
500 mi are available. This means that one centimetre on the display can represent a
distance of between 0.05 mi and 500 mi.
1. Press
OK
to open the selection menu.
Select “Scale”. Press
OK
.
The “Change scale” menu will open. ✔
2. Use
to select the desired scale. Press
OK
.
The map will appear in the new scale. ✔
Plus Point: You can also use directly in the map display to alter the
scale.