ASSEMBLY
OM 0277-A 10
IMPORTANT:
A proper initial installation will give you years of
satisfactory service on your equipment. Please
read carefully following instructions that have
been specially included to help you and ensure
you are satisfied with your purchase.
WARNING: Unfortunately, snowblowers
will be faced with forgotten or hidden
objects under the snow, such as : chain,
tires, stones, pieces of wood, etc. In spite
of all our efforts, machines are not built to
resist all those conditions.
Danger: Tractors Too Big
It is dangerous to use a tractor that is too big
and powerful. The tractor will always be able to
overload the blower, even if the machine is
already at maximum capacity. Furthermore,
tractors being very high, the driveline angles will
be excessive which means the universal joints
will be very vulnerable and the life of the
driveline will be dramatically reduced.
How to Determine Driveline Angles
IMPORTANT: To obtain the proper universal
joint angles, it is recommended to adjust the
three point hitch at the furthest point from the
tractor recommended by the manufacturer
The universal joint angle is directly related with
the life of driveline. In order to reduce the angle,
it is necessary to increase the distance between
the snowblower and the tractor.
Angles of Driveline Joints Too Large
Avoid
Reasonable Angles of Driveline Joints
Acceptable
To Next Page
Loading...
