MAINTENANCE
OM 0277-A 17
LUBRICATION
Use oil or a grease gun and lubricate as follows:
DESCRIPTION INTERVAL LUBRICATION REQUIRED
8 hours
Grease each universal joint. Separate the
sliding parts and cover each one of them
with grease
Driveline
16 hours Oil the push pins
Chain
4 hours
and after each operation
Lubricate with chain lube
Drive Shaft 24 hours of operation Grease fitting on shear plate
Every month
Check oil level. If needed, add AGMA 5EP
extreme pressure oil, SAE 80W90 gear oil or
equivalent.
Gearbox
Once a year Replace oil
Bearing 24 hours of operation Grease each auger bearing
To Next Page
Loading...
