Operation
13
IQ Control
OPERATIONAL TEST PROCEDURE
1
Plug oven into electrical source
2
Turn the oven power switch on.
3
NOTE: This scrolling can be bypassed by pressing SCAN.
The controller will scroll through the following:
a.) Appliance Type
b.) Software #
c.) Download #
d.) SCK Address
4
Press any illuminated product key.
5
The cook cycle will count down in the display.
RECIPE REVIEW - Quickly see what is proĆ
grammed for each product key.
1. Press the SCAN key.
2. Select any product key previously proĆ
grammedĆLED beside the key will be lit.
3. Press the DOWN arrow key to scroll through
the list.
4. Press SCAN to exit.
VIEW TEMPERATURE SETTING
1. Press the TEMP key 'once' to view Actual TemĆ
perature, or
2. Press the TEMP key 'twice' to view Set TemĆ
perature.
3. Press the TEMP key 'three' times to view Fan
Speed
4. Press the TEMP key 'four' times to view Fan DiĆ
rection
COOL DOWN
1. To enter Cool Down, press the COOL DOWN
key while the oven door is closed. When the
display reads COOL," the door can then be
opened.
WARNING!!
THE FAN IS STILL MOVING. DO NOT
REACH INTO THE OVEN. The fan will auĆ
tomatically shut off when the actual temĆ
perature reaches 105°F.
2. To exit Cool Down, press the COOL DOWN
key again. The oven will come back up to set
temperature.
WARNING!!
ALWAYS TURN OFF MAIN POWER BEĆ
FORE REMOVING BAFFLE OR PLACING
HANDS NEAR FAN.
To Next Page
Loading...
