Operation
12
Solid State Digital Control
1
2
3
4
5
6
7
8
9
10
11
12
13
Figure 10
CONTROL DESCRIPTION
1. SELECTOR SWITCH - turns power to the oven
on or off. Allows selection of Cook or Cool Down
Modes and fan speed (if applicable).
2. DISPLAY - displays time or temperature and
other information related to oven function.
3. HEAT LAMP - lights when heater is on.
4. PULSE LAMP - lights when Pulsed Fan Mode
is turned on.
5. HOLD LAMP - lights when Hold Mode is
turned on.
6. DIAL - used to enter set points in display
7. START/STOP KEY - starts or stops the timer.
8. TIME KEY - used to show time in the display.
9. TEMP KEY - used to show set temperature in
the display.
NOTE: Actual temperature is shown while the
TEMP key is held down.
10. HOLD KEY - turns Hold Mode on or off.
11. PULSE KEY - turns Pulse Mode on or off.
12. LIGHTS SWITCH - controls interior lights.
13. CIRCUIT BREAKER SWITCH - controls powĆ
er to the oven.
To Next Page
Loading...
