Blomberg BGR30420SS - Page 32

6. If cooking function, temperature and time
values are suitable, touch Start to start cooking.
Cooking starts and ''ON" appears on the display.
>>The oven will be heated up to the preset
temperature and will maintain this temperature
until the end of the cooking time you selected.
MPORTANT:
segments of the inner oven temperature
~--•".!Vrnbol (1) will turn on wt1en the oven
react·1es the set temperature.
7- After the cooking is completerJ, the oven will
give an audible warning.
8. To stop the alarm signal, just touch any key.
Switch on fully automatic operation
In this operation mode you can adjust cooking
time and end of cooking time.
1 . Put your meal into the oven and close ttle
oven door.
2- Select the desired oven function.
3- If you want to change tile temperature adjust
the temperature using numbers on tr1e right
side wtlile oF or oc is flashing.
4- For cooking time, touch the 'Cook Time' key
once.
Enter the cooking time using numbers on the
rigtlt while Cook and Time are flashing.
5- Touch "Start Time" key once for end of cook-
ing time. Enter end of cooking time using
numbers on the rigllt while Start and Time are
flast1ing.
6- When end of cooking time is set, end of
cooking time and the Start and Time symbols
will appear on the display continuously.
32/EN
7- If cooking function, temperature, time and
end of cooking time values are suitable, toucll
"Start" key to start cooking. "Cooking" appears
on the display.
, Oven timer automatically calculates tile star-
tup time for cooking by deducting tr1e cooking
time from U1e end of cooking time you have set.
8- Selected operation mode is activated Wilen
ttle startup time of cooking tlas come. "ON"
appears on display and oven heats up to the
adjusted temperature. It maintains this tempera-
ture until the end of the cookin time.
PORT ANT:
If you want to cancel the program after
,_._.performing semi-automatic or automatic
programming, you need to reset tile cook-
ing time. You can also switcll off the oven
by touching the "Clear/Off" key.
Setting the booster(for only electric ovens)
{Quick heating)
Use Booster (rapid pre-heating) function to make
ttle oven reactl tile desired tem erature faster.
IMPORTANT:
Booster cannot be selected in Warm Keep,
,..._ •• Self Clean, Sabbath and Bread Proof cook-
ing positions. Booster will be set by default
in other positions. If you do not want to use
Booster function, disable it by pressing
'Booster' key.
1. If cooking function, temperature and time
values are suitable, toucl1 Start to start cooking.
Cooking starts and 'ON' appears on the display.