Blomberg BGR30420SS - Initial Heating; Initial Use; First Cleaning of the Appliance

OFF position of timer
You can bring the timer to the OFF position. At
OFF position even turn on the function knob,
timer do not allow heaters on.To set timer to the
OFF position when it is at Standby mode:
1 . Press to button 2.
2. It you can not see 0:00 on display, bypress-
ing 5 and 6 buttons adjust it toO:OO.
3. If you see already 0:00 on tile display,by
pressing button 6 make display0:01 . Then
by pressing button 5 makeit 0:00 again.
4. You will hear alarm sound. Pressbutton 3 to
switch off the alarm sounrJ.You will see
"AUTO" is blinking and trledisplay shows
time of the day.
Now timer is in OFF position. It is U1e same
position wl1en you first time connect your
prorJuct to the main supply .First cleaning of
the appliance
rn
MPORTANT:
Vhen ~emoving appliance for cleaning ancl!
r serv1ce;
Disconnect AC power supply.
Carefully remove the range by pulling
outvvard.
Range is heavy, use care in handling.
rn
OTICE:
he surface mightget damaged by some
etergents or cleaning materials.
Do not use aggressive detergents, cleaning
powder/cream or any sharp objects. Be
careful to avoid steam burn. Some cleaners
can produce noxious fumes if appliecl to a
hot surface.
1. Remove all packaging materials.
2. Wipe the surfaces of the appliance
witt1 a clamp cloth or sponge anfj 1jry
witt1 a cloth.
ot surfaces maycause burns I
1'-.:....J Do not touct1 tt1e hot surfaces of the ap-
pliance. Use oven gloves. Keep children awa
from the appliance.
Smell and smoke may emit during first
heating. Ensure that the room is well venti-
,..._.latefJ
Any procluction residues or conservation
layers must be burnt off before the first use.
Heat up the appliance for about 30 minutes
anfj tt1en switch it off.
Initial use
First cleaning of the appliance
r • .,~he surface might get damaged by some
~ I.J~etergents or cleaning materials.
,_.__...1Do not use aggressive detergents, cleaning
powders/creams or any sharp objects
during cleaning.
Do not use harsh abrasive cleaners or sharp
metal scrapers to clean the oven door glass
since they can scratch the surface, which
may result in shattering of the glass.
1 . Remove all packaging materials.
2. Wipe the surfaces of the appliance with a
damp cloth or sponge and dry with a cloth.
Initial heating
Heat up the product for about 30 minutes and
then switch it off. Thus, any production residues
or Ia ers will be burnt off and removed.
ARNING:
ot surfaces cause burns!
f'-.Z...~IProduct may be hot when it is in use. Never
touch the hot burners, inner sections of the
oven, heaters and etc. Keep children away.
Always use heat resistant oven gloves when
putting in or removing dishes into/from the
hot oven.
Gas oven
1. Take all baking trays and the wire grill out of
the oven.
2. Close the oven door.
3. Select the bake function.
4. Set the temperature 350° F.
5. Operate the oven about 30 minutes.
6. Turnoffyouroven.
35/EN