Problem Reason Soluton
Laundry does not smell like
the softener. (**)
Detergent s put n the wrong compartment.
If detergent s put n the prewash
compartment although prewash
cycle s not selected, the product can
take ths detergent durng rnsng or
softener step. Wash and clean the
dspenser wth hot water. Put the
detergent n the correct compartment.
Detergent mght be mxed wth the softener.
Do not mx the softener wth
detergent. Wash and clean the
dspenser wth hot water.
Detergent residue in the
detergent drawer. (**)
Detergent s put n wet drawer.
Dry the detergent drawer before
puttng n detergent.
Detergent has become damp.
Keep detergents closed n an
envronment free of humdty and
do not expose them to excessve
temperatures.
Water pressure s low.
Check the water pressure.
The detergent n the man wash compartment got
wet whle takng n the prewash water. Holes of
the detergent compartment are blocked.
Check the holes and clean f they are
clogged.
There s a problem wth the detergent drawer
valves.
Call an Authorsed Servce Agent.
Detergent mght be mxed wth the softener.
Do not mx the softener wth
detergent. Wash and clean the
dspenser wth hot water.
Regular drum cleanng s not appled.
Clean the drum regularly. For ths
procedure, please see "4.7.2 Cleanng
the loadng door and the drum".
Too much foam forms inside
the product. (**)
Improper detergents for the washng machne are
beng used.
Use detergents approprate for the
washng machne.
Excessve amount of detergent s used.
Use only suffcent amount of
detergent.
Detergent was stored under mproper condtons.
Store detergent n a closed and dry
locaton. Do not store n excessvely
hot places.
Some meshed laundry such as tulle may foam too
much because of ther texture.
Use smaller amounts of detergent for
ths type of tem.
Detergent s put n the wrong compartment.
Put the detergent n the correct
compartment.
Softener s beng taken early by the product.
There may be problem n the valves
or n the detergent dspenser. Call an
Authorsed Servce Agent.